Fluidwell

Fluidwell F016 Flow indicator&Totaliser

The F016 is a local indicator which displays the actual flow rate, total and accumulated total. In addition to the average K-Factor or Span, eight linearization points can be entered with their frequencies or values.

Request quote > Compare
Downloads & links
Brochure F serie
Datasheet F016
Product configurator
Website Fluidwell
The F016 is a local indicator which displays the actual flow rate, total and accumulated total. In addition to the average K-Factor or Span, eight linearization points can be entered with their frequencies or values. The unit will interpolate between these points, greatly enhancing accuracy in any flow range, even for very low frequency applications. This linearization affects all displayed information as well as the pulse output.
On-screen engineering units are easily configured from a comprehensive selection.

Advantages
  • Robust IP66, IP67 (NEMA4X) field enclosure. It is so rugged, you can even stand on it!
  • Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
  • Programming can be done by your own crew, with the sensible menu-driven structure, saving cost and irritation. Know one, know them all!
  • Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.
Application overview F016

Features

  • Eight point linearization of the flow curve - with interpolation.
  • Scaled pulse output reflecting the accumulated total.
  • Displays total and flow rate simultaneously.
  • Large digit selection for flow rate or total.
  • Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.
  • Total - resettable: seven 17mm (0.67") digits.
  • Accumulated total - not resettable: eleven 8mm (0.31") digits.
  • Separate engineering units for flow rate and total.
  • Green or amber LED backlight with adjustable intensity.
  • Auto backup of settings and running totals in EEPROM memory.
  • Easy configuration with clear alphanumerical display.
  • Operational temperature: -40°C to +80°C (-40°F to 176°F).

Flowmeter Inputs

  • Pulse type inputs:
    Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.

Pulse Outputs

  • Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons).
    Max. frequency: 500Hz.
    Adjustable pulse length from 1 msec. to 10 seconds.
  • Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.

Alarm Outputs

  • None.

Analog Outputs

  • None.

Applications

  • The F-Series is your first and best choice for field mount indicators. Especially in harsh weather conditions like rain, snow, salty atmosphers and temperatures between -40°C up to +80°C (-40°F up to 176°F) for safe and hazardous area applications!
  • Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range is required.
    Alternative advanced models: F112,F118 or the D-Series DIN panel mount indicators.

Power Supply

  • Battery.
  • 8 – 24V AC/DC.
  • 115 – 230V AC.
  • Basic: 8 - 30V DC

Sensor Supply

  • 3.2, 8.2, 12, 24V DC.

Intrinsically Safe

  • ATEX:
    II 1 G Ex ia IIC T4
    II 1 D Ex iaD 20 IP 65 / 67 T 100 °C
  • IECEx:
    Ga Ex ia IIC T4
    Ex iaD 20 IP65 / 67 T100 °C
  • CSA:
    I.S. Class I / II / III, Div. 1, Grps A...G, T4
    Class I, Zone 0, AEx ia IIC T4
  • FM:
    I.S. Class I / II / III, Div. 1, Grps A...G, T4
    Class I, Zone 0, AEx ia IIC T4

Explosion Proof

  • ATEX:
    II 2 GD EEx d IIB T5

Communication
– Modbus communication only available on F1-Series products.
– HART communication is pending for a more advanced F0-model.

LCD example F016
Photo F016
 Add
Use commas to separate tags
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »