Kubler positie displays electronisch LCD Position display CODIX 133
Data sheets and more: [click here]
   |
CODIX 133: | Easy to operate position indicator; direct display of encoder pulses. | |
|
Number of digits: 8, Panel cut-out: DIN 48x24 mm |
|||
LED CAN Display CODIX 538
Data sheets and more: [click here]
 |
CODIX 538: | Powerful: LED display, Floating decimal point, Factor + Offset, Reverse polarity protection Panel cut-out: DIN 48x24 mm Protection: IP 65 front side CAN Bus : CAN specification 2.0A/2.0B, CANopen compliant, transfer rate up to 1MBaud |
|
LED Position display CODIX 52x
Data sheets and more: [click here]
 |
CODIX 521: |
Position indicator with multiplying and dividing factor, set value and faster speed. |
| CODIX 524: |
Combination device with position indicator, pulse counter, frequency meter and timer function. |
|
| CODIX 52P: |
Position indicator and Tachometer with separate scalable inputs. |
|
|
Number of digits: 6, Panel cut-out: DIN 48x24 mm, Protection: IP 65 front side , Power supply: 10...30 VDC, Inputs: NPN/PNP |
||
LED Position display CODIX 54x
Data sheets and more: [click here]
 |
CODIX 541: |
Position indicator with multiplying and dividing factor, set value and faster speed. Count frequency: max. 25 kHz (Quad mode), quadrature input (phase discrimination) |
|
| CODIX 544: |
Multifunction as timer, tachometer, pulse counter, timer, position display. Count frequency: max. 25 kHz (Quad mode), quadrature input (phase discrimination) |
||
| CODIX 54P: |
Tachometer and position display with separate inputs. Count frequency: max. 15 kHz (Quad mode) |
||
|
Number of digits: 6, Panel cut-out: DIN 96x48 mm, |
|||
LCD Position preset counter Series 92x
Data sheets and more: [click here]
 |
CODIX 923: | Limits: 1 |  |
|
| CODIX 924: | Limits: 2 | |||
| CODIX 924-4: | Limits: 4 | |||
| CODIX 924-6: |
Limits: 6 |
|||
|
Multifunction preset counter with pulse counter, position display, frequency display, tachometer, preset timer or short time meter. Possibility to connect more outputs, inputs or interface-modules Number of digits: 2x6, Panel cut-out: DIN 48x48 mm, Protection: IP 64 front side , Count frequency: 55000 Hz, Very fast measurement principle: Gate or time interval (HRA), Power supply: 10 ... 30 VDC and 90 ... 260 VAC, Outputs: Relay or Optocoupler Decade keyboard, LCD-Display optional backlighted, also negative rot or negative red-green backlighted |
||||
LED SSI-Display 570
Data sheets and more: [click here]
 |
SSI 570: | SSI-clock frequency up to 1 MHz, master or slave mode. Position display in conjunction with absolute encoders with SSI interface up to 25 bit |
|
Number of digits: 6, Presets: 2, Protection: IP 65 front side Power supply: 17 ... 30 VDC and 115 / 230 VAC, Outputs: Scaleable analogue output or 2 optocoupler as limits with tracking preset or RS 232/485 interface. |
||
LED Multifunction display 571
Data sheets and more: [click here]
 |
571: | Fast count input for our Limes system . Display programmable: Speed, rotational speed, count and timer functions. |
|
|
Number of digits: 6, Dimensions: DIN 96x48 mm |
|||
LED Position and Difference Counter 572
Data sheets and more: [click here]
 |
572: | Fast count input for our Limes system . 2 separate count inputs 4 control inputs |
|
|
Number of digits: 6, Dimensions: DIN 96x48 mm, Presets: 4, Reset: electrical, Power supply: 17 ... 30 VDC or 24 VAC, Count frequency: max 1 MHz for each channel |
|||