Basic flow rate indicators / totalizer with IP67 field or panel mounting
The F-series is your first and safest choice when mounting in the field for safe and dangerous environmental applications. Especially in harsh weather conditions such as rain, snow, salty atmospheres and temperatures between -40 ° C to + 80 ° C.
Benefits:
• Robust IP67 (NEMA Type4X) field housing. It is so robust, you can even stand on it!
• Intrinsically safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Programming can be done by your own staff, with the logical menu-driven structure,
saves costs and irritation. Know one, know them all!
• Very diverse mounting options: wall, pipe, panel mounting or directly on the flow meter
Brochure F series ♦ Reference Guide 
F010 Flow display - display of the current flow
The F010 is a local indicator with large 26 mm (1 ") high characters that displays the actual flow rate. The measurement and time unit to be displayed below the flow rate are easily selected via an alphanumeric configuration menu. No self-adhesive labels need be selected applied on the outside of the housing: a weather-resistant and user-friendly solution! The configuration of K-factors or Span and the number of decimal places is done via software functions, without sensitive DIP switches or trimmers.
F011 Totaliser - with resettable total and non-resettable total
The F011 is a local indicator that displays the current total and the cumulated total at the same time. Total can be set to zero by pressing the CLEAR button twice. The accumulated total can record up to 11 digits and is stored in the EEPROM memory every minute, just like the running total. The unit of measurement to be displayed is easily selected via an alphanumeric configuration menu. No self-adhesive labels need to be applied to the outside of the housing: a weather-resistant and user-friendly solution!
F012 Flow & Totaliser - displays flow and total at the same time
The F012 is our most popular model. This local indicator shows the current flow, the total and the collected total. Total can be set to zero by pressing the CLEAR button twice. The accumulated total can record up to 11 digits and is stored in the EEPROM memory every minute, just like the running total.
On-screen engineering units can be easily configured from an extensive selection.
F013 Flow & Totaliser with alarm output
The F013 is a versatile flow indicator and totalizer with continuous flow monitoring function. It offers the possibility to set a low flow rate and a high flow rate alarm value. If desired, an alarm-ignore function can be set to allow an incorrect flow during a certain period. The display shows flow rate, total, accumulated total, alarm values and alarm messages. On-screen engineering units can be easily configured from an extensive selection.
F014 Flow & Totaliser with pulse signal output
The F014 is a local indicator / transmitter that displays the actual flow, the total and the collected total. A scaled pulse related to the accumulated total is generated to resend the count on the display. Total can be set to zero by pressing the CLEAR button twice. The accumulated total can record up to 11 digits and is stored in the EEPROM memory every minute, just like the running total.
On-screen engineering units can be easily configured from an extensive selection.
F016 Flow indicator & Totalizer with linearisation and pulse signal output
The F016 is a local indicator / transmitter that displays the current flow, the total and the collected total. In addition to the average K factor or span, eight linearization points can be entered with their frequencies or values. The unit interpolates between these points, significantly improving accuracy in each current range, even for very low frequency applications. This linearization influences all displayed information as well as the pulse output. On-screen engineering units can be easily configured from an extensive selection.
F110 Flow Indicator & Totaliser with analogue and pulse signal outputs
The F110 flow transmitter is the most popular model in our range of flow indicators / totalisators, complete with pulse and analog output signals. Even demanding applications are catered for with our basic unit configuration. The display shows flow rate, total and accumulated total. On-screen engineering units can be easily configured from an extensive selection.
F111 Dual Flow Indicator & Totaliser with two pulse signal outputs
The F111 contains two flow indicators / totalizers in one housing, including a pulse output for each stream. There is no relationship between the currents, even different types of input signals can be used.
On-screen engineering units can be easily configured for each stream from an extensive selection. The F111 can be set to display the selected information manually or with an automatic switch function.
F112 Linearized Flow Indicator & Totaliser with analog and pulse signal outputs
The F112 is a versatile flow indicator / transmitter and totalizer with the ability to accurately linearize the flow meter signal. In addition to the average K-factor or span, fifteen linearisation points can be entered with their frequencies or values. The unit interpolates between these points, significantly improving accuracy in each current range, even for very low frequency applications. This linearization influences all displayed information as well as the output signals.
F113 Flow Indicator & Totaliser with high / low alarm, analog and pulse signal outputs
The F113 is a versatile flow indicator / transmitter and totalizer with continuous flow monitoring function. It offers the possibility to set two low flow rate and two high flow rate alarm values. If desired, an alarm-ignore function can be set to allow an incorrect flow during a certain period. A maximum of five outputs are available to send the flow rate, the alarm conditions and the total collected.
